The LSH Servomotor - the power pack
Nominal torque 0,2 Nm up to 20 Nm
Based on the new winding technology, the so-called concentrated winding, the new LSH generation of motors improves power density by between 30% and 70% relative to conventional technologies. For the user that means as much as a 100% improvement in dynamics, and more compact installation combined with smooth running.
The LST-Servomotor - the versatile one
Nominal torque 0,1 Nm up to 24 Nm
Featuring conventional winding technology, the LST motor combines all the advantages of a 6-pole synchronous servomotor.
- Well suited to speeds up to 9000 rpm. Special windings are possible on request.
- High overload capacity even at standstill based on efficient heat distribution in the stator packet.
- Increased rotor moment of inertia for torque adaptation.
Further motors with other speeds or voltages available upon request!
The LSMx motor
The series is divided into low inertia (LSML) and middle inertia (LSMM).
- In the low inertia series there are motors with ratings of 200 W, 400 W, 750 W and 1000 W. The rated speed is 3000 min-1. They are designed for a 3-phase supply at 230 V. In addition, the LSML08 motors with ratings of 750 W and 1000 W are also available for 400 V.
- The middle inertia series includes motors with ratings of 1 kW, 1.5 kW, 2 kW and 3 kW. Here the rated speed is 2000 min-1, the motors are designed for a 3-phase supply at 230 V or 400 V. The LSMM13-300 motor is only available as a 400 V variant.
- The surface of the motors has been kept smooth (not ribbed) to ensure good cleaning in applications in a very wide range of areas.
- By means of distributed winding technology, low electrical time constants were achieved for good controllability.
- Designed in accordance with IEC standards and CE-compliant.
